3 Benefits of Having the MMRAD-GEN6-10 Radiator Installed on Your 2010-12 Hyundai Genesis Coupe

Have you ever traveled with a Hyundai Genesis Coupe that broke down because of overheating V6 engines? A broken water pump, low oil levels, and thermostat issues could have caused it. It could also be due to malfunctioning radiators.
As important cooling products, the radiators like the MMRAD-GEN6-10 by the Mishimoto company are a must-have for your 2010-12 Hyundai Genesis Coupe. Not only do they maintain the multipoint injection of the 6-speed automatic (SHIFTRONIC) transmissions, but these $351.95 cooling products also serve other benefits that this product guide explains.

- What is a radiator?
- What are the 3 benefits of installing?
- Why should you install the MMRAD-GEN6-10 by Mishimoto?
- What to consider before purchasing?

What is a Radiator?

A radiator is an engine cooling product with tubes that allow coolant fluid passage while releasing the generated heat to the surrounding air. This coolant fluid channels the multipoint injection heat to the radiator, gets cold, and flows to the engine again.
Like the MMRAD-GEN6-10, there are three main radiator parts. The core, inlet/outlet tanks, and the pressure cap. The core represents the aluminum structure between the tanks with pipes that release the coolant heat.
These fluids are responsible for transferring the heat away from the V6 3.8L engine through the inlet/outlet tanks of the radiator pipes. The process goes on and never results in overflowing fluids since there is a pressure cap to stabilize surrounding pressure levels.
That proves why some individuals also refer to the coolant as a radiator part. While they are not mechanical components, they are the heat transfer medium while the radiator dispels the heat.

What are the 3 Benefits of Installing?

1. Prevents Engine Breakdown
If you have ever witnessed a vehicle giving out smoke by the roadside, the cause would likely have been a broken radiator. That happens when the cooling chambers are not effective enough to prevent stored heat inside the 3.8L V6 6AT (303 HP) engines of your rear wheel drive Hyundai engines. Without a radiator, the fueled engines remain hot and possibly start to overheat before breaking down. Having functional radiators like the MMRAD-GEN6-10 by Mishimoto helps to prevent that.
2. Efficient Cooling Systems
Despite their immense benefits, the MMRAD-GEN6-10 are not multipoint injection coolants. The aluminum radiator parts only allow the uninterrupted flow of coolant fluid while blowing off the heat. Hence, changing to these $351.95 Mishimoto cooling products would result in an improved heat exchanger system for your 2010-12 Hyundai Genesis Coupe.
3. Works as Coolant Vessel
In addition to improved cooling systems for your 6-speed automatic (SHIFTRONIC) transmission, the MMRAD-GEN6-10 behaves as a reservoir that accepts the heated coolant fluid from the V6 V6 3.8L engines. The tank walls hold the fluid before passing it to the cooling tubes. The aluminum radiator also separates the heated coolant from the cold ones. That makes it easier for the cooling fans to release the heat from the fluids.

Why Should You Install the MMRAD-GEN6-10 by Mishimoto?

• Since its commencement in 2005, the Mishimoto company has released some of the best radiator parts and cooling products.


• As a prominent vendor in the US, their very accessible online support means you can get the necessary assistance to avoid ordering the wrong radiator types. You can reach their support team via phone at 302-762-4501 or email at support@mishimoto.com.


• Aside from compatibility with the 2010-12 Hyundai Genesis Coupe, the $351.95 MMRAD-GEN6-10 are cost-effective radiator solutions.


• The MMRAD-GEN6-10 also has aluminum surface walls that make it very durable.
  

What to Consider Before Purchasing?

The primary consideration when choosing the MMRAD-GEN6-10 radiator is to verify it's vehicle-specific compatible with your Hyundai Coupe (two-door). For example, the MMRAD-GEN6-10 is the suggested radiator type for the (2010-12) V6 Hyundai Genesis Coupe. Other cooling products might not perform as well as the recommended type.
The outer material of the radiator cooling products should be durable too. An example is the MMRAD-GEN6-10 core with as required aluminum thickness, which helps the radiator parts to manage the heated fluids.
Do you still have fears about the MMRAD-GEN6-10 radiator or any of our other cooling products? Leave us a message at support@mishimoto.com. You can also discuss directly with the support team for assistance on the best radiator parts for your Hyundai.