6 Reasons to Upgrade to 2010-16 Hyundai Genesis Coupe LED Board DD0149P by Diode Dynamics

Express your style by installing colored LED boards in your 2010-16 Hyundai Genesis Coupe

You can drive your 2010-16 Hyundai Genesis Coupe through pools of mud and grime without spoiling your fog lights when you mod it with the LED board DD0149P by Diode Dynamics. This LED board features heavy-duty construction with water-resistant seals, and so it will endure inclement weather and splashes of mud and debris. The paired LED board will set you back $28, so you will use double that amount to get LED boards for both of your car's fog lights. Diode Dynamics specializes in designing performance lighting technology and was the first company to design LED boards for automobiles in 2013. Let us consider the following:

• What is an LED board?


• What are the six reasons to upgrade?


• Why should you buy DD0149P by Diode Dynamics?


• What to consider when purchasing?

What is an LED board?

An LED board is a sought-after aftermarket automotive lighting fixture that incorporates SMD (Surface Mounted Device) LEDs, microchips, and tiny wires, all of which connect to each other on a circuit board. The LED boards produce way more light than factory lighting bulbs, and so they are handy alternatives to your vehicle's factory incandescent fog lights bulbs. They are fashioned to the specifications of a certain car; therefore, they will plug into the connections without a glitch.

What are the six reasons to upgrade?

Easy DIY Installation: The good news is that you don't have to send your car to a shop, have any extensive experience, or buy special tools to install the DD0149P. Diode Dynamics offer a versatile adapter with the LED board for a plug-and-play installation on the 2010-16 Hyundai Genesis Coupe. It should only take 20 minutes to install and can be done at home.

Increased Brightness: When your car is upgraded with the Diode Dynamics LED board DD0149P, you will have a clearer view of the road. This LED board's total light output of 118 lumens converts to a light beam distance of over three times that of your factory light bulbs. This output has been tested at the Diode Dynamics production facility in St. Louis, Missouri, so you can rest assured of the credibility of these figures. One of your out-of-the-box incandescent fog light bulbs may discharge approximately 54.88 lumens per watt. Therefore, the LED board's light output will be almost four times superior to that of your stock fog light bulb.

Express Your Style: Whether you want an elegant, cool white, or aggressive red, the DD0149P comes in a selection to suit the needs of different car owners. Not only can you set the color of the light (for example, red), the possibilities are also endless when it comes to which combinations or configurations you can install the LED boards.

Rich Colors, At Ideal Color Temperatures: One of the LED lights' benefits is its ability to deliver high color rendering indexes (CRI). CRI can be defined as a light beam's ability to expose the original color of the objects upon which it shines. When driving at night or in thick fog, this LED board's 6000K red LED light beams will show the colors of the various features of the road, e.g., that of asphalt, lane boundaries, and the dirt/grass that lines the side of the road. This product will help you remain within road and lane boundaries and help you avoid obstacles. 

Affordable Aesthetic Upgrade: At only $28 per LED board, you don't have to limit yourself to just one strip. You can buy as many LED boards as you have open sockets for a relatively small amount on your 2010-16 Hyundai Genesis Coupe. These fixtures will make a dramatic change to the appearance of your car at a low cost.

Quality and Durability: If you work under extreme conditions, the lights in your car are likely to dim or fail at one point or another. With a fair- rating and operating temperatures between -40C to 85C (-40F to 185F), the DD0149P can handle almost any condition. Diode Dynamics also ensure the 118 Lumen strength of each part with real-life testing.

Why should you buy DD0149P by Diode Dynamics?

• 
  

  Having been established in 2006, Diode Dynamics has well over a decade's worth of experience manufacturing automotive lighting technologies. From the start, it dedicated itself to building LED lighting products that are a cut above the rest in terms of quality, efficiency, and reliability. Currently, the company is considered one of the most trusted brands in automotive LED lighting products. 

  
  


• 
  

  Diode Dynamics is located in the USA, with its main offices at Diode Dynamics, 4200 Shoreline Drive, Earth City, Missouri 63045 USA. They provide dedicated support to their customers who can contact them from the official website for assistance. You can also contact us, and we'll provide all the help you need.

  
  


• 
  

  As a show of its trust in this product, Diode Dynamics offers a longer-than-average 3-year warranty for replacements.

  
  


• 
  

  The DD0149P is priced at only $28 per piece with no extra expenses.

  
  


• 
  

  The product is manufactured in the USA in St. Louis, Missouri.

  
  


• 
  

  The LED board is reliable, with an operating temperature of -40C to 85C (-40F to 185F).

  
  


• 
  

  This Diode Dynamics LED board makes it possible for you to see further into the dark because it produces way more light than your stock fog lights. That means that your car will be safer to drive with this product, especially when you have to run into fog, heavy rain, or snow. 

  
  


• 
  

  The Diode Dynamics LED board DD0149P will help you enhance your car's look without using up a lot of money. Its sharper light beams and 6000K red will make your vehicle appear bolder and sportier, and so it will give you bragging rights amongst your colleagues.

  
  


• 
  

  The Diode Dynamics DD0149P LED board is explicitly designed for the 2010-16 Hyundai Genesis Coupe, so its connectors will effortlessly plug into those of the factory bulbs it will replace. When you plug in the LED board's connectors, you will peel off the 3M adhesive on its back and mount the board to the inside of the fog light's factory housing.